Predictive maintenance that puts every repair on your schedule
AH Group and Siemens put industrial IoT sensors on your most critical assets and stream their condition data into JunoEdge. You’ll see which machine is wearing out well before it stops a line, and you can plan the repair for your next changeout while the fix is still small.
What sets AH apart is what happens after the alert. JunoEdge already holds each asset’s repair history and warranty status, and our network of 6,000+ OEM and specialty repair partners can take the repair from there. One partner and one subscription cover it all, from the first sensor reading to the finished repair.
In partnership with SIMATIC PDM, a Siemens software.
- Asset health and repair history in one login
- Backed by 6,000+ vetted OEM and specialty repair partners
Every failure sends a signal first
A spindle bearing rarely quits without warning. It runs warmer. It vibrates a little more each week. In most plants, nobody is watching those signals, so the asset runs until it stops and the repair starts after the line goes down.
By then the damage has spread. A worn bearing becomes a damaged spindle, a scheduled job becomes an emergency, and a small repair becomes a large one.
Predictive maintenance reads those early signals and turns them into a plan.
How AH predictive maintenance works
Step 1: Pick the assets that matter.
We work with your team to identify the critical equipment where a stop costs the most: spindles and other high-value rotating assets.
Step 2: Siemens installs the sensors.
Our partner Siemens fits industrial IoT sensors to each asset and connects them. Your maintenance team does not have to run the install.
Step 3: Data flows into JunoEdge.
Siemens software connects directly to JunoEdge, AH's repair management platform. One login shows how every monitored asset is running.
Step 4: See trouble before it stops you.
When a bearing starts heating up or vibration trends the wrong way, JunoEdge shows it, so you know which asset is heading toward failure and roughly when.
Step 5: Time the repair.
Pull the part at your next planned changeout instead of after a breakdown. AH can manage that repair through our partner network and log it against the asset's history.
Catch it early and the repair costs less
Repairs done before failure are smaller repairs. Less collateral damage, fewer replaced components, no rush freight, no overtime crew.
Example: a spindle repair that runs about $5,000 after a failure can come in closer to $2,000 when the bearing is caught as it starts to heat up. Multiply that across every monitored asset in a plant and the subscription pays for itself in avoided cost.
Siemens sensors. JunoEdge visibility.
Most monitoring tools stop at the alert. JunoEdge puts that alert next to everything else you need to act on it.
Blur or replace any real customer names, sites, or asset IDs.
Live asset health
Condition data from every sensor in one dashboard, by asset, line, and site.
Early warning
See which assets are trending toward failure so the repair can be planned, not rushed.
Health and repair history together
Sensor data sits beside each asset's repair record, cost, and warranty status in the same platform.
Built to scale
Start with a handful of critical assets or monitor a hundred. Add sensors as the program proves itself.
One subscription
Sensors, software, and dashboard access in a single subscription through AH.
What it changes for your plant
Lower repair cost
Fixing parts before they fail keeps repairs small and keeps emergency spend off the books.
One partner from sensor to repair
Sensors, software, and repair management come through one relationship. No separate monitoring vendor, no hand-off gap between the alert and the fix.
- 100,000+repair components a year
Built on real repair volume
AH manages more than 100,000 repair components a year across eight industries. That experience shapes which assets we monitor and how we act on what the sensors see.
Sensors and software. Your team stays in charge.
AH predictive maintenance is a technology program. We supply the sensors and the software, Siemens handles installation, and your maintenance team decides when and how work gets done. You get the data to make that call with confidence.
What each team gets
- Plant and maintenance managers
Fewer surprise stops
Know which asset needs attention before it takes a line down, and plan the work around production.
- Reliability engineers
Condition data you can act on
Live sensor trends tied to each asset's repair history, in one place.
- Procurement
One contract, one partner
Sensors, software, and repair management under a single AH relationship.
- Finance and operations leaders
Lower, more predictable repair spend
Planned repairs replace emergency ones, and every dollar is reported by asset and site.
Frequently asked questions
What is predictive maintenance (PdM)?
Predictive maintenance uses sensors on equipment to monitor its condition in real time and flag signs of failure early, so repairs can be planned before a breakdown. AH Group delivers it with Siemens industrial IoT sensors and the JunoEdge platform.
How is predictive maintenance different from preventive maintenance?
Preventive maintenance follows a fixed schedule whether the asset needs it or not; predictive maintenance acts on the asset's actual condition. With PdM, you service equipment when the data says it is needed.
Who installs the sensors?
Siemens, AH's technology partner, installs and connects the sensors on your critical assets.
Where do I see the data?
In JunoEdge. Siemens software connects directly to it, so you log in once to see asset health, early warnings, and repair history together.
Which assets should be monitored?
Start with the equipment where unplanned downtime costs the most, such as spindles and other critical rotating assets. AH helps you choose during the assessment.
How is it priced?
As a subscription through AH, sized to the number of assets and sensors in your program.
Does AH send technicians to do maintenance work?
No. AH supplies the sensors and software, Siemens installs them, and your team keeps control of the maintenance work. AH can manage the resulting repairs if you choose.
Which industries does AH support?
Automotive, aerospace, warehousing and fulfillment, e-commerce, heavy equipment and agriculture, oil and gas, pharmaceutical manufacturing, and food and beverage processing, across North America and Europe.
Start with your most critical assets
Tell us which equipment you cannot afford to lose. We will map a sensor program for it with Siemens and show you what that data looks like in JunoEdge.